Nerimotori

Products by Nerimotori

Showing all 11 results

  • Nerimotori

    Atex Motors

    Three-phase electric motors suitable to be used in potentially explosive atmospheres with the presence of gas, combustible gas or mist. where after ignition has occurred, combustion spreads to the entire unburned mixture.
    Directive 1999/92/CE gives details on the  ‘Division and definition of zones where explosive atmosphere might occur’.
    Neri Motori produces ATEX motors for the following Zones:

    Zone 2
    An area in which an explosive mixture is not likely to occur in normal operation and if it occurs it will exist only for a short time.
    Note: This area may also include areas close to Zone 0 or 1.

    Zone 22
    A place in which an explosive atmosphere in the form of a cloud of combustible dust in air is not likely to occur in normal operation but, if it does occur, will persist for a short period only
    Note: This area may also include areas close to equipment, protective systems and components containing powder that might  come out from the containers due to loss and form powder deposits (e.g. ground salt that comes out from the mills and might deposit its powder).

  • Nerimotori

    Basic Series Motors

    These motors have been introduced in our products range in order to combine availability and good price together with high quality standards. Neri Motori has selected some foreign suppliers to offer an even wider products range.
  • Nerimotori

    Double polarity motors

    These motors are available according to IEC international standards from size 56 to size 200 and in versions with flange B5, B14 and feet B3. Available polarities: single winding 2/4-4/8- /6 and double winding 6/8 – 2/6 – 2/8 – 2/12 – 2/16 – 4/16 – 4/32 .They can also be supplied with electromagnetic brake in continuous or alternating current.
  • Nerimotori

    IE2 motors

    These motors are the effective and efficient solution when transmission of movement in alternating current is needed. Manufactured with special low loss plate, to reach high efficiency values according to the international charts 2005/32/CE.
  • Nerimotori

    MotoInverter NERIDRIVE Series

    Power range from 0,09 kW (IEC56) to 7,5 kW (IEC132) single phase and three phase.
  • Nerimotori

    Nema Motors

    These three-phase and single phase motors are built according to mechanical NEMA regulations.
    Available in size 80  and 100 with flange 56C 143C 145C 182C 184C 213C 215C. also available with feet designed according to IEC and NEMA regulations.
  • Nerimotori

    Self-braking motor

    These motors are the effective and efficient solution when transmission of movement in alternating current is needed. Three-phase motors are available according to IEC international standards from size 50 to size 200 and in versions with flange B5, B14 and feet B3. Single polarities 2/4/6/8/12. The Brakes  are available both n alternating current and continuous  current . Power range is from Kw 0,06 to Kw 37,00.
  • Nerimotori

    Single-phase motors

    These motors are suitable for “domestic2 environments or where current is only single phase. These are available according to IEC international standards from size 50 to size 100 and in versions with flange B5, B14 and feet B3. Single polarities 2/4/6 and double polarities 2/4 poles; Available power range is from Kw 0,06 to Kw 2,2. They can also be provided with electromagnetic brake in continuous current.
  • Nerimotori

    Three-phase motors

    These motors are the effective and efficient solution when transmission of movement in alternating current is needed. Three-phase motors are available according to IEC international standards from size 50 to size 200 and in versions with flange B5, B14 and feet B3. Single polarities 2/4/6/8/12/16/32 and in IE2 efficiency from size 80. Power range is from Kw 0,03 to Kw 37,00.

  • Nerimotori

    Three-phase motors

    These motors are the effective and efficient solution when transmission of movement in alternating current is needed. Three-phase motors are available according to IEC international standards from size 50 to size 200 and in versions with flange B5, B14 and feet B3. Single polarities 2/4/6/8/12/16/32 and in IE2 efficiency from size 80. Power range is from Kw 0,03 to Kw 37,00.
  • Nerimotori

    Two Speed Motors for fan

    ASYNCHRONOUS THREE PASE DOUBLE POLARITY
    DP SERIES FOR FANS

Al Kayed Motion