GVR Pompe

Products by GVR Pompe

Showing all 9 results

  • GVR Pompe

    APF

    Volumetric flanged gear pumps complete of joint suitable for coupling to electric motor form B3/B14.

    • Construction in cast iron.
    • Pumps can be coupled to any standard motor form B3/B14.
    • Pumps can be available complete of safety by-pass valve.
    • Inlet and outlet nozzles are aligned with same diameter.
    • Self-priming pumps.
  • GVR Pompe

    B

    Bare shaft gear pumps.

    Execution
    Application
    Special Executions
  • GVR Pompe

    BC

    Bare shaft gear pumps complete of heating chamber on the pump body available in two different constructions:

    • Cast iron with shafts and gears in steel;
    • Inox AISI 316.
    • Pumps available with three different types of seal:
    • /C = Mechanical seal
    • /B = Packing seal
    • /A = Lip seal
    • Pumps can be available complete of safety by-pass valve.
    • Pumps can be heated by recirculating inside the chamber hot water, steam or the liquid pumped.
    • Inlet and outlet nozzles are aligned with same diameter.
    • Self-priming pumps.
  • GVR Pompe

    BFC

    Gear pumps with bell housing

  • GVR Pompe

    BMF-BCF

    Close coupled gear pumps

    Volumetric close coupled gear pumps directly coupled to motor with special shaft. Pumps available in three different constructions:

    • Cast iron with shafts and gears in steel;
    • Bronze with shafts and gears in Inox AISI 316;
    • Inox AISI 316.
    • Three-phase or single-phase motor, 1400 rpm or 900 rpm, protection IP55, Cl. F.
    • Pumps can be available with safety by-pass valve.
    • Inlet and outlet nozzles are aligned with same diameter.
    • Self-priming pumps.
  • GVR Pompe

    Close coupled gear pumps

    Volumetric close coupled gear pumps directly coupled to motor with special shaft. Pumps available in three different constructions:

    • Cast iron with shafts and gears in steel;
    • Bronze with shafts and gears in Inox AISI 316;
    • Inox AISI 316.
    • Three-phase or single-phase motor, 1400 rpm or 900 rpm, protection IP55, Cl. F.
    • Pumps can be available with safety by-pass valve.
    • Inlet and outlet nozzles are aligned with same diameter.
    • Self-priming pumps.
  • GVR Pompe

    IF

    Volumetric flanged gear pumps complete of joint suitable for coupling to electric motor B3/B14 or mounted on base plate and coupled to electric motor B3, available in two different constructions:

    • Bronze with shafts and gears in Inox AISI 316;
    • Inox AISI 316.
    • Pumps can be coupled to any standard motor form B3 or B3/B14.
    • The four bushings of the pump can be supplied in different materials according to the liquid to pump. These bushings reinforce the workload of the shaft and avoid the premature usage of the gears.
    • Pumps can be available complete of safety by-pass valve.
    • Inlet and outlet nozzles are aligned with same diameter.
    • Self-priming pumps.
  • GVR Pompe

    MBM

    Gear pumps mounted on base plate.

    Execution
    Application
    Special Execution

    Volumetric gear pumps mounted on base plate suitable for coupling to B3 electric motor by elastic joint available in three different constructions:

    • Cast iron with shafts and gears in steel;
    • Bronze with shafts and gears in Inox AISI 316;
    • Inox AISI 316.
    • Pumps available with three different types of seal:
    • /C = Mechanical seal
    • /B = Packing seal
    • /A = Lip seal
    • Pump can be available complete of safety by-pass valve.
    • Inlet and outlet nozzles are aligned with same diameter.
    • Self-priming pumps.
  • GVR Pompe

    MBMC

    Volumetric gear pumps complete of heating chamber on the pump’s body and mounted on base plate suitable for coupling to electric motor form B3 by elastic joint available in two different constructions:

    • Cast iron with shafts and gears in steel;
    • Inox AISI 316.
    • Pumps available with three different types of seal:
    • /C = Mechanical seal
    • /B = Packing seal
    • /A = Lip seal
    • Pumps can be available complete of safety by-pass valve.
    • Pumps can be heated by recirculating inside the chamber hot water, steam or the liquid pumped.
    • Inlet and outlet nozzles are aligned with same diameter.
    • Self-priming pumps.
Al Kayed Motion